If the flow from your external aquarium filter drops, start by checking the intake strainer, hoses, and valves. A kinked hose or a strainer clogged with debris may be the cause. If you need to open the filter, follow the manual for your specific model. How you disconnect the fittings and fill the filter before restarting it varies by model.
What should you check before opening the filter?
- Is a hose kinked behind the cabinet or pinched by the door?
- Are leaves blocking the intake strainer? Is there buildup in the outlet?
- Are the valves open as instructed? If you’ve just started the filter, check whether it filled as the manufacturer intended.
Compare the flow with what’s normal for your filter. The maximum pump output listed on the box isn’t the same as the flow with hoses and filter media installed.
How do you clean an external aquarium filter?
- Get ready. Have a bucket and towel handy. Unplug the filter before taking it apart. Disconnect the hoses and valve block in the order specified in the manual.
- Check the prefilter sponge. If your model has a separate prefilter, inspect it first. The sponge collects larger particles that can restrict flow.
- Clean only the media that needs attention. You can gently rinse a biological filter sponge in water taken from the aquarium. Don’t wash or replace all the biological media at once. Follow the manufacturer’s instructions for any specialty media.
- Reassemble and check the filter. Inspect the seal, put the baskets back in the same order, and fill the filter according to the manual. Once it restarts, check the flow and make sure the area around the fittings is dry. Check again after the filter has been running for a while.
What if the flow is still weak after cleaning?
Use the manual to check for trapped air and blocked hoses, and make sure the impeller is seated correctly. If the filter leaks, runs abnormally, or won’t fill, switch it off safely and have it checked.
After major changes to the filtration system, keep an eye on your fish and water test readings. If you’re considering replacing the equipment, read our guide to choosing an external aquarium filter. You’ll find other routine tasks in our aquarium maintenance guide.
In Vilnius, we can check the condition of your filter during an aquarium maintenance and cleaning visit. Tell us the filter model, aquarium volume, and when you noticed the change in flow.
